Posted on

Rebuilt Guitars #4

This heavy beast of an alder body guitar started as a rescued New York Pro telecaster.

The jack needed to be re-soldered and the neck was starting to crack. I drove two lag pins into the heel to secure the neck integrity. You can see one of the pin covers in a photo below. I took the logo off, too.

It holds tune and intonates well for a 3-saddle tele.

The action is very low – this was a well designed and solidly built inexpensive guitar.

I intended to replace the neck with a tele neck. Instead I traded the guitar for a Nuno Bettencourt shredder I intend to mod.


Posted on

Rebuilt Guitars #3

These old guitars were built by Tiesco and sold by Sears. The pickups are collectible and traded. The rest not so much.

I replaced the tuners, straightened and leveled the neck and fretboard, and used electrolysis to get the rust off the bridge components.

The finish on the body was impregnable. I concocted a paint-over scheme that turned out pretty well. But not easy.

Nice vintage sound. Everything works and plays. But these were never great guitars so nostalgia has to count for something.